AEC670 is a kind of eddy current electrical conductivity meter, which is designed for quick & convenient measurement of material property, such as material separate、quality control、material state check and so on. It uses the electromagnetism testing principle. Testing objects focus on non-ferromagnetic material.
ACH1000 Cross Hatch Adhesion Tester also known as cross cut testing kits, this instrument is designed and manufactured according to ISO2409-1992 standard, suitable for GB/T9286-98, BS 3900 E6 / ASTM D3359, mainly suitable for the determination of organic paint cross-hatch adhesion. This instrument can be used in laboratories and construction sites under various conditions.
The X-ray NDT equipment is used to show the internal discontinuity or faults of materials, products or welding from a radiographic image on a film, according to the principle of the different absorption of the X-ray for different material depending on the different thickness of the materials. We can evaluate the quality of materials and products based upon the characters, size and position of the discontinuity or faults. In this series of products, the X-ray generator is furnished with SF6 gas as an insulation, electric fan for forced cooling, the controller is equipped with the advanced microprocessor controlling system, SCR modules for voltage regulation, converting modules to control the primary and secondary side of the SCR as well as the advanced electronic circuits of voltage & current stabilization and interference-free .Thus, the performance of the complete equipment has been improved remarkably.
The Ketos Ring(AS5282 Ring) is used to check overall performance of the magnetic particle examination system. The Ketos Ring is 5" in diameter and .875" thick, with a 1¼" diameter center hole. The block includes (12) thru-holes at .070" diameter and distances of .070, .140, .210, .280, .350, .420, .490, .560, .630, .700, .770, and .840" from the OD surface.
AJR NDT: AFD1000 Concrete Ultrasonic Flaw Detector: Quick detection of the integrity of basic pile continuous wall with Ultrasonic Penetration Method Testing of building foundation piles by cross-hole sonic logging； Inspection of concrete defects by ultrasonic method, such as uncompacted, cellular, hole area. Detecting defects of one hole by one trigger two receive. Dynamic testing of geotechnical investigation, rock, concrete etc.
Power energy - energy saving type. The average service life of the light source – 30000h! Good light uniformity. Center UV-A light ＞3000uW/cm². White light ＜20Lux. Continuous working outside surface temperature＜8K(18℃) No UV-B/UV-C light.
MT-45N(4.5kg) Weight Lift Test Bar is designed for the calibration and certification of Magnetic Particle Inspection Yokes.We can also supply other weight MT lift test block like 18kg, 22.5kg.
One-touch video/audio recording and image capture Support max 256G SD card or USB stick Support image capture while recording Zoom function (8 levels) Cable M/FT counter and text 7-hour battery life 512Hz transmitter 360 ° rotation camera head Optional removable camera heads with manual focus and self-leveling camera head
AJR NDT AAT-M manual pull-off adhesion tester measures the adhesion of coating to metal, wood, plastic, concrete and other rigid substrates. The pull-off adhesion tester measures the force required to pull a specified test diameter of coatings or material away from its substrate using hydraulic pressure. Pressure is calculated based on force and is displayed on a digital LCD with unit Mpa or kN and represents the coating's strength of adhesion to the substrate. The tester confirms to ASTM D4541, D7234, ISO 4624, and others.
AJR NDT AAT-A automatic pull-off adhesion tester measures the adhesion of coating to metal, wood, plastic, concrete and other rigid substrates. The pull-off adhesion tester measures the force required to pull a specified test diameter of coatings or material away from its substrate using hydraulic pressure. Pressure is calculated based on force and is displayed on screen with unit Mpa or kN or Psi and represents the coating's strength of adhesion to the substrate. The tester confirms to ASTM D4541, D7234, ISO 4624, and others.
Copyright © 2010-2023 AJR NDT CO., LTD All rights reserved
Vince Hu
Vince Hu
Vince Hu
Email Us