Magnetic Particle Inspection

AJR NDT AJE Series Moveable AC / DC Magnetic Tester

AJR NDT AJE Series Moveable AC / DC Magnetic Tester

This moveable MT tester is suitable for magnetic particle testing. Inspect parts of various shapes made of ferromagnetic materials. Cracks, slag inclusions and other minor defects caused by casting, forging, quenching, grinding, fatigue and other reasons can be found on the surface and near-surface of the parts. The equipment can perform AC and DC magnetization and AC automatic demagnetization of parts; it can be used for continuous method and residual magnetism flaw detection; it can be fixed for use or carried to the field for use. With appropriate methods such as strut method or winding method, the special-shaped parts of the parts can be properly magnetized. And can perform segmental flaw detection on large-sized parts.

Technical Specifications & Documentation >>

AJR BST600 Magnetic Field Strength Meter / Gauss Meter

AJR BST600 Magnetic Field Strength Meter / Gauss Meter

AJR BST series of handheld digital Gauss Meter/Tesla can be used for measurement of DC magnetic field, AC magnetic field and other types of magnetic field of the magnetic induction; Portable Gauss Meter can carry about, wide measurement range, easy to operate, and the liquid crystal show clear. Portable Gauss Meter of the Power supply is 1 9V dry-cell batteries, it can be continuously used for 20 hours.

Technical Specifications & Documentation >>

AJR JCZ Series Magnetic Field Strength Meter / Gauss Meter

AJR JCZ Series Magnetic Field Strength Meter / Gauss Meter

Pocket size magnetometers used to detect residual magnetism after demagnetising.

Technical Specifications & Documentation >>

MTU-3 Test Block/ Magnetic Test Block

MTU-3 Test Block/ Magnetic Test Block

The reference block type 1 is a residually magnetized metal disc, where, caused by a special treatment, a network of coarse and fine cracks had been generated. The magnetic field of the reference block generates stray fluxes of different strength across these cracks. More sensitive inspection media result in a more distinct indications as compared to the indications when lower sensitivity is used. The central bore hole is made for easier handling.

Technical Specifications & Documentation >>

Magnetic Field Indicator / Pie Gauge / Berthold Penetrameter

Magnetic Field Indicator / Pie Gauge / Berthold Penetrameter

Magnetic Field Indicator / Pie Gauge is made according to America ASTME709, ASTMA275 standard and Chinese JB3965, JB4730-94 standard and “Steel Pressure Vessel Magnetic Flaw Detection” and “Pressure Forgins Magnetic Flaw Detection” Therefore, it is not only suitable for pressure vessels but also general machinery products. It is an essential tool for magnetic flaw detection. It can test performance of detection equipment, magnetics ink. We can easily use it to test the magnetic field strength and magnetized direction。

Technical Specifications & Documentation >>

Ketos Ring Magnetic Test Block (AS5282 Ring)

Ketos Ring Magnetic Test Block (AS5282 Ring)

The Ketos Ring(AS5282 Ring) is used to check overall performance of the magnetic particle examination system. The Ketos Ring is 5" in diameter and .875" thick, with a 1¼" diameter center hole. The block includes (12) thru-holes at .070" diameter and distances of .070, .140, .210, .280, .350, .420, .490, .560, .630, .700, .770, and .840" from the OD surface.

Technical Specifications & Documentation >>

4.5kg Magnetic Lift Test Block

4.5kg Magnetic Lift Test Block

MT-45N(4.5kg) Weight Lift Test Bar is designed for the calibration and certification of Magnetic Particle Inspection Yokes.We can also supply other weight MT lift test block like 18kg, 22.5kg.

Technical Specifications & Documentation >>

AMT Series Magnetic Coil

AMT Series Magnetic Coil

The working principle of the magnetic coil is to charge the capacitor with a high voltage small current, and then the capacitor instantly discharge the coil and generate a large current on the magnetized coil, which generates a magnetic field. In short, the magnetic charging coil is to charge and discharge the capacitor, so that the coil is used as a load to generate a magnetic field. Small parts should not be centered within the coil, but held close to it where field strength is strongest. The longitudinal magnetic field cutting across the crack attracts and holds iron powder to indicate the crack.

Technical Specifications & Documentation >>

18 Records 2/2 Pages Prev   1  2

Contact Us

 

Address: Room 802, 1# High Building, B Area, Dong Liang She Village, Huining Town, Xindu District, Xingtai City, Hebei Province, China 054001.

Tel:+86-0319-2827816

Whatsapp / Mobile / Wechat: +8613393190604

Skype: vince-hu1

Email: sale@ajr-ndt.com

ajrtradeexport@hotmail.com

Web: www.ajr-ndt.com

Live Chat